PBN crucibles

PAM-XIAMEN offers PBN crucibles

PBN crucible (L: 160.3mm)

PBN crucible (L: 157.5mm)

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

With more than 25+years experiences in compound semiconductor material field and export business, our team can assure you that we can understand your requirements and deal with your project professionally.

2019-03-13

Lumenpulse Launches New Range of LED Architectural Downlights and Spotlights

Lumenpulse Launches New Range of LED Architectural Downlights and Spotlights Lumenpulse (LMP.TO), a leading pure-play specification-grade LED lighting solutions provider, has launched Lumenalpha, an exceptional range of architectural downlights and spotlights, which sets new standards in performance, light quality, flexibility and lifetime. Available worldwide, the collection boasts over [...]

2016-09-26meta-author

Single-emitter LD Chip 9xxnm @15W

Single-emitter LD Chip 9xxnm @15W PAM200914-LD-CHIP-976nm Brand: PAM-XIAMEN Wavelength: 9xxnm Stripe width: 96um Output Power: 15W Cavity Length:4mm For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com

2019-05-09meta-author

4″ CZ Prime Silicon Wafer Thickness = 200 ± 25 µm-3

PAM XIAMEN offers4″ CZ Prime Silicon Wafer Thickness = 200 ± 25 µm-3 4inch Prime CZ-Si wafer 4 inch (+/- 0.5 mm), thickness = 200 ± 25 µm, orientation (100)(+/-0.5°), 2-side polished, p or n type (no matter) , ? Ohm cm (no matter), Particle: 0.33µm, <qty30 ttv ≤ 10um，warp ≤30um One [...]

2019-09-20meta-author

GaN substrate

What we provide: Item undoped N- Si doped N+ Semi-insulating P+ Freestanding GaN substrate yes yes yes GaN on sapphire yes yes yes yes InGaN on sapphire yes *** AlN on sapphire yes LED wafer (p+GaN/MOW/N+GaN/N-AlGaN/N+GaN/N-GaN/sapphire) Freestanding GaN substrate/GaN on sapphire/LED wafer: For specifications of Freestanding GaN substrate/GaN on sapphire/LED wafer, please view Gallium Nitride wafer: http://www.qualitymaterial.net/products_7.html InGaN on Sapphire: For specification of InGaN on sapphire template, pleas view InGaN substrate: https://www.powerwaywafer.com/InGaN-Substrates.html AlN on [...]

2019-09-24meta-author

Vapor phase decomposition–droplet collection–total reflection X-ray fluorescence spectrometry for metallic contamination analysis on Ge wafers

Ge substrates are recently being reconsidered as a candidate material for the replacement of Si substrates in advanced semiconductor devices. The reintroduction of this material requires reengineering of the standard IC processing steps. In this paper, we present the extension of the methodology of [...]

2013-08-30meta-author spectrometry on Ge wafers

SINGLE CRYSTALS, WAFERS AND CRYSTAL SUBSTRATES-3

PAM XIAMEN offers Single Crystals, Wafers and Crystal Substrates. PAM XIAMEN provides both standard and customized high quality single crystals, wafers and substrates for a wide range of applications such as LED, ferroelectric, piezoelectric, electro-optical, photonics, high power electronics, and high frequency power devices, just to name [...]

2019-03-12meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

PBN crucibles

PBN crucibles

Share this post

Related Posts

Lumenpulse Launches New Range of LED Architectural Downlights and Spotlights

Single-emitter LD Chip 9xxnm @15W

4″ CZ Prime Silicon Wafer Thickness = 200 ± 25 µm-3

GaN substrate

Vapor phase decomposition–droplet collection–total reflection X-ray fluorescence spectrometry for metallic contamination analysis on Ge wafers

SINGLE CRYSTALS, WAFERS AND CRYSTAL SUBSTRATES-3

Float-Zone Mono-Crystalline Silicon

Test Wafer Monitor Wafer Dummy Wafer

Nanofabrication Photoresist

Photo Mask

CdZnTe (CZT) Wafer

Ge(Germanium) Single Crystals and Wafers

Float-Zone Mono-Crystalline Silicon

Test Wafer Monitor Wafer Dummy Wafer

Nanofabrication Photoresist

Photo Mask

CdZnTe (CZT) Wafer

Ge(Germanium) Single Crystals and Wafers